![]() ![]() When two power supplies are installed, the modules provide complete power redundancy and are hot swappable even during the cards' transmission. The isap2000 optionally accommodates up to two separate power supplies, which may derive power from AC (110/220) or DC (-36~72V) power sources. ![]() Uplink supports copper connection, maximum up to 96x cross connect for Voice and. There are 6 slots available for hot-swappable I/O cards and two slots are provided for power supplies. Supports Internal clock and recovery clock modes Supports Single fractional and unframed service Multiple, fractional Supports PCM31, FAS+CRC4, CRC self-test Supports HDLC/GFP bridge operation, 16x VCG with total 16 remote device, 16 Per VCG, MAX data rate 32Mbps Per VCG Supports 16 balanced or unbalanced BNC connectors Optical STM-1 Supports 2x GE combo ports Auto Negotiation, AUTO-MIDX, 10M/100M/1000M, Full/Half Duplex : Supports 802.3x flow control 1000FX, SFP : LC Supports 802.3x flow conrol Up to 16x (ITU-T G.703) Line Impedance : 75ΩBNC or 120Ω Bit rate : 2048kbps±50ppm Line code : HDB3 Supports 2x STM-1 optical fiber port with SFP slot Supports 1+1 optical fiber protection P to P, GE over 16 application Maximum 220ms delay variance between links Supports 2x GbE Combo ports Supports IEEE 802.1Q VLAN and QinQ, Link aggregation Fiber port support ALS(Auto Laser Shutdown) function Built-in BERT for performing local and remote loopback Supports Console, GUI and SNMP management Supports local and remote FTP/TFTP f/w upgrade Complies with ITU-T G.8040 standard Management port One console port with connector One SNMP port with connector LED Indicators SYS, PWR, PWR1, PWR2, GE(LNK/ACT, SD), (LOS, SYNC) Standards IEEE802.3, IEEE802.3u, IEEE802.3Z, IEEE802.3X, IEEE802.1Q, IEEE802.1ad, SNMPv1/v2c/ v3, ITU-T G.703, ITU-T G.704, ITU-T G.823 Dimensions 310 x 440 x 44mm (D x W x H) Power AC: V, DC: -48V, Supports AC+AC, DC+DC, AC+DC Power Consumption <24W Temperature Operating: -5 ~ 50 C Humidity : 90% non-condensing SNMP Management GE GE isap isap isap1000Ģ STM1/ Access Multiplexer - isap1000 Point to Multi-points 16 aggregation Management FE GE SNMP 16 4 FRM220A-Eoe1/G FE 9 isap1000-ge/16 Point to Multi-points 16 aggregation over STM-1 8 FRM220A-iMUX4 FRM220A-iMUX8 FE STM1/ Access Multiplexer Management FE SNMP FRM220A-Eoe1/G GE STM-1 SDH 4 FE isap1000-ge/stm1 8 FRM220A-iMUX4 FE FRM220A-iMUX8 GE + 16 over STM-1 SNMP Management GE isap1000-stm1 STM-1 SDH STM-1 isap1000-stm1 GE Model Name Description isap b-ad 2x GbE Combo over 16 BNC, P to P, 1U 19" Rack, AC+DC power isap r-ad 2x GbE Combo over 16, P to P, 1U 19" Rack, AC+DC power isap1000-ge/16b-ad 2x GbE Combo over 16 BNC, P to M, 1U 19" Rack, AC+DC power isap1000-ge/16r-ad 2x GbE Combo over 16, P to M, 1U 19" Rack, AC+DC power isap1000-ge/stm1-ad 2x GbE Combo over STM1, P to M, 1U 19" Rack, AC+DC power isap1000-stm1b-ad 2x GbE Combo + 16 BNC over STM1, P to P, 1U 19" Rack, AC+DC power isap1000-stm1r-ad 2x GbE Combo + 16 over STM1, P to P, 1U 19" Rack, AC+DC power Comector Power Type isap 1000 Example: isap B AD isapģ Managed Multiplexer - isap2000 isap2000 2U, Voice Managed Multiplexer The isap2000 is a 2U 19 6 slots rack type Time Division Multiplexer for fractional network across, which is designed for non-stop operation. ![]() Provides 2-port STM-1 fiber with 1+1 protection. The two GE combo ports support Link aggregation, port based VLAN and 802.1Q VLAN function. isap1000 provides two Gigabit Combo ports (2-port 10/100/1000Base-T and 2-port 1000Base-X SFP slot) with 16x or 2x STM-1 fiber interfaces. ![]() isap1000 supports a variety of management access over console, and SNMP. The product complies with SDH standards and interfaces with existing SDH backbones through a single or 1+1 protection STM-1 interface. isap1000 provides connectivity for up to 16. 1 STM1/ Access Multiplexer - isap1000 isap1000 STM1/ Acess Multiplexer isap1000 is 1U 19 rack type STM-1/ terminal multiplexer which delivers traditional PDH services over SDH networks. ![]()
0 Comments
Leave a Reply. |